Contribution to the systemic modeling of a photovoltaic devices
Keywords:
PV system, SA-RT method, SADT method, MPPT, Bond graphAbstract
The modelling of systems using systemic tools has been for a few years, a subject which has attracted the attention of scientists and especially researchers to allow designers to acquire a rigorous approach to problem solving using the capabilities of already existing methods and tools. This document presents a contribution in the field of modelling, where a methodology based on two methods has been proposed. The first concerns the functional analysis to extract the use functions and the constraint parameters from the system. In this methodology, the static functional study is carried out using the SADT method. On the other hand, the dynamic behavioral analysis is carried out by the SA-RT method. Then, we used a behavioral and parametric analysis, the Bond Graph method, to observe the evolution of representative quantities of a photovoltaic system.
References
Ahmed, F., Robinson, S., & Tako, A. A. (2014). Using the structred analysis and design technique (SADT) in simulation conceptual modeling, Simulation Conference (WSC). 1038–1049.
Allani, M. Y., Tadeo, F., Mezghanni, D., & Mami, A. (2019). Application of system modeling and simulation of the photovoltaic production, IJCSNS International Journal of Computer Science and Network, 19(5).
Andoulsi, R. (2001). Etude d’une Classe de Systèmes Photovoltaïques Par une Approche Bond Graph Modélisation, Analyse et Commande, Thèse doctoral à l’Ecole Centrale de Lille.
Andoulsi, R., Mami, A., Dauphin-Tanguy, G., & Annabi, M. (2002). Bond Graph Modeling and Dynamic Study of a Photovoltaic System Using MPPT Buck-Noost Converter, IEEE, International Conference on Systems, Man and Cybernetics, 3.
Benard, V., Cauffriez, L., & Renaux, D. (2008). The Safe-SADT method for aiding designers to choose and improve dependable architectures for complex automated systems, Reliability Engineering & System Safety, Elsevier, 9(2),179-196.
Ben Jouida, T. (2008). Contribution à la mise en oeuvre d'une gestion stratégique de la production par l'analyse des postes de travail selon une démarche systémique, étude de cas, Thèse, ENIT, Tunisie.
Ben Salem, J., Lakhoua, M. N., & El Amraoui, L. (2016). Analysis of a Braking System on the Basis of Structured Analysis Methods, International Journal of Advanced Computer Science and Applications, 7(2). DOI: 10.14569/IJACSA.2016.070212.
Ben Salem, J., Lakhoua, M. N. & El Amraoui, L. (2017). Approach Based on the Bond Graph Applied to Anti-lock Braking System, Journal Automation & Systems Engineering, 11(1), 1-10.
Boehinger, A-F. (1968). self-adaptative DC converter for solar spacecraft power supply, IEEE Trans on Aerospace and electronic systems, 4, 102-111.
Cheng, L., Ye, Z., & Eong, Z. (2016). BG Modeling and Simulation Analysis of Direct Drive Volume Control Electro-hydraulic Servo System With Long Pipeline, International Conference on Aircraft Utility Systems (AUS). IEEE/CSAA.
Demri, A., Lasquo, A. C., Guerin, F., & Christofol, H. (2008). Functional and dysfunctional analysis of a mechatronic system, Annual Reliability and Maintainability Symposium (RAMS), 114-119.
Demri, A. (2010). Contribution à l’évaluation de la fiabilité d’un système mécatronique par modélisation fonctionnelle et dysfonctionnelle, Thèse de doctorat.
Diagne, S. (2015). Modélisation sémantique conceptuelle pour l'ingénierie de performances comportementales de produits complexes, thèse de doctorat, Références 151 Université de Strasbourg.
Dumola, D. (2004). User’s Manual, getting started with Dumola, Dynamic Modeling Laboratory, and Version 5.3a.
Faucher, J. (2004). Pratique de l'AMDEC, Edition Dunod, Paris.
Flo, A., Kjaernes, M., & Skomedal, A. (1992). A bridge from structured analysis (SA/RT) to specification and description language, Eighth International Conference on Software Engineering for Telecommunication Systems and Services, 93- 97.
Fritzson, P. (1998). Modelica. A unified object-oriented language for system modeling and simulation, Springer.
Glaa, R., Lakhoua, M. N., & El Amraoui, L. (2016). Using SA-RT Method for the Analysis and the Supervision of Hydrogen Circuit, Journal of Electrical Engineering, 16(3), 1-6
Jha, M. S., Bressel, M., Ould Bouamama, B., & Dauphin-Tanguy, G. (2016). Particle filter based hybrid prognostics of proton exchange membrane fuel cell in bond graph framework, Computers & Chemical Engineering Journal.
Khanh, H. N. (2008). Aide au développement de systèmes temps réel à l’aide d’un langage graphique flots de données, Thèse de doctorat.
Khaouch, Z., Zekraoui, M., Bengourram, J., Kouider, N. & Mabrouki, M., (2017). Mechatronic Modeling of a 750kW fixed-Speed Wind Energy Conversion System Using the Bond Graph Approach, ISA Transactions.
Lakhoua, M. N. (2009). Application of functional analysis for the design of supervisory systems: Case study of heavy fuel-oil tanks, ITSSA, 5(1), 21-33.
Lakhoua, M. N. (2011). Application of SA-RT method to supervisory systems, Journal of Electrical Engineering, 11(2),44- 45.
Lakhoua, M. N., Ben Hamouda, M., Glaa, R., & El Amraoui, L. (2016). Structured Analysis and Modeling of a Supervisory Control and Data Acquisition in a Thermal Power Plant, ITEE Journal, 5,1-5.
Lakhoua, M. N., Ben Salem, J., Jabri, I., & Battikh, T. ( 2020). Application of system modeling and simulation of the photovoltaic production, Int. J. Mechatronics and Automation, 7(2).
Marca, D. (2006). IDEF0 and SADT: A Modeler's Guide, Boston: OpenProcess, Inc., 3rd edition.
Mezghanni, D., Andoulsi, R., Mami, A., & Dauphin-Tanguy, G., (2007). Bond graph modeling of a photovoltaic system feeding an induction motor-pump, Simulation Modeling Practice and Theory, 15, 1224-1238.
Ould Bouamama, B., & Thoma, J. (2000). The Bond Graphs, under the direction of Geneviève Dauphin-Tanguy, Thermodynamic and chemical processes, 236-277, IC2 Collection, Hermes Edition, Paris.
Plateaux, R., Choley, J. Y., Penas, O., & Riviere, A. (2009). Towards an integrated mechatronic design process, IEEE International Conference on Mechatronics,1-6.
Rekioua, D., & Aissou, S. (2013). Photovoltaic Panels Characteristics Methods?, Ceit Tunisa.
Renaux, D. (2013). Specifying systems and applications with SA/SD/RT method, modeling/SA training course 1, IPa10401010-94.
Roboam, X., Astier, S., Foch, H., Fontès, G., Gandanegara, G., Piquet, H., Saisset, R., Sareni, B., & Turpin, C. (2007). Graphes de liens causaux pour systèmes à énergie renouvelable (partie 2). Techniques de L’ingénieur. D3 971.
Salah, Z., Lakhoua, M. N., & Sellami, A., (2014). On the Operating Safety and the Analysis of Control-Command Systems, International Conference on Electrical Sciences and Technologies in Maghreb, (CISTEM),1-5.
Schoman, K., & Ross, D. T. (1977). Structured analysis for requirements definition, IEEE Transaction on Software Engineering 3(1), 6–15.
Turki, S., Soriano, T., & Sghaier, A. (2005). A SysML profile for mechatronics integrating Bond Graphs, LISMMA Supméca.
Ward, P. T. (1986). The Transformation Schema: An Extension of the Data Flow Diagram to Represent Control and Timing, IEEE Trans. Software Engineering, SE-12(2), 198- 210.
Wertani, H., Ben Salem, J., & Lakhoua, M. N. (2020). Analysis and supervision of a smart grid system with a systemic tool, The Electricity Journal, 33, 1-8.
Downloads
Posted
License
Copyright (c) 2021 Hamza Wertani, Jamel Ben Salem, Mohamed Najeh Lakhoua
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
