Recycled concrete artifacts: towards sustainability of civil construction
Article Sidebar
Main Article Content
Abstract
Present article discusses the production of concrete artifacts that use in their composition recycling aggregates of Solid Waste from Construction and Demolition (SWCD). The study was designed as experimental / comparative, with destructive tests of proof bodies made with recycled aggregates (test group) and with traditional aggregates (control group). Subsequent statistical analysis of the data collected from the comparison between these groups was conducted. The optimal dosage for artifacts produced with recycled aggregates was found, demonstrating that the choice of recycled materials could be an economical and environmentally sustainable solution in the context of the eco-innovations.
Downloads
Article Details
1. Proposal of Policy for Free Access Periodics
Authors whom publish in this magazine should agree to the following terms:
a. Authors should keep the copyrights and grant to the magazine the right of the first publication, with the work simultaneously permitted under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 that allows the sharing of the work with recognition of the authorship of the work and initial publication in this magazine.
b. Authors should have authorization for assuming additional contracts separately, for non-exclusive distribution of the version of the work published in this magazine (e.g.: to publish in an institutional repository or as book chapter), with recognition of authorship and initial publication in this magazine.
c. Authors should have permission and should be stimulated to publish and to distribute its work online (e.g.: in institutional repositories or its personal page) to any point before or during the publishing process, since this can generate productive alterations, as well as increasing the impact and the citation of the published work (See The Effect of Free Access).
Proposal of Policy for Periodic that offer Postponed Free Access
Authors whom publish in this magazine should agree to the following terms:
a. Authors should keep the copyrights and grant to the magazine the right of the first publication, with the work simultaneously permitted under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 [SPECIFY TIME HERE] after the publication, allowing the sharing of the work with recognition of the authorship of the work and initial publication in this magazine.
b. Authors should have authorization for assuming additional contracts separately, for non-exclusive distribution of the version of the work published in this magazine (e.g.: to publish in institutional repository or as book chapter), with recognition of authorship and initial publication in this magazine.
c. Authors should have permission and should be stimulated to publish and to distribute its work online (e.g.: in institutional repositories or its personal page) to any point before or during the publishing process, since this can generate productive alterations, as well as increasing the impact and the citation of the published work (See The Effect of Free Access).
d. They allow some kind of open dissemination. Authors can disseminate their articles in open access, but with specific conditions imposed by the editor that are related to:
Version of the article that can be deposited in the repository:
Pre-print: before being reviewed by pairs.
Post-print: once reviewed by pairs, which can be:
The version of the author that has been accepted for publication.
The editor's version, that is, the article published in the magazine.
At which point the article can be made accessible in an open manner: before it is published in the magazine, immediately afterwards or if a period of seizure is required, which can range from six months to several years.
Where to leave open: on the author's personal web page, only departmental websites, the repository of the institution, the file of the research funding agency, among others.
References
BRANDES, M.; KURAMA, Y. (2018) Effect of recycled concrete aggregates on strength and stiffness gain of concrete and on bond strength of steel prestressing strand. PCI Journal, n. 2, p. 87-105.
BRASIL. Lei Federal N° 12.305/2010, de 02 de agosto de 2010. Institui a Política Nacional de Resíduos Sólidos, altera a Lei n° 9.605, de 12 de fevereiro de 1998, e dá outras providências. Diário Oficial da União, Brasília - DF.
CORRÊA, L. (2009) Sustentabilidade na construção civil. Monografia (Especialização em Construção Civil) - Escola de Engenharia, Universidade Federal de Minas Gerais. Belo Horizonte, p. 70.
GANIRON JR, T. (2015) Recycling concrete debris from construction and demolition waste. International Journal of Advanced Science and Technology, v. 77, p. 7-24.
IBGE – Instituto Brasileiro de Geografia e Estatística (2010) Pesquisa nacional de saneamento básico 2008. Rio de Janeiro: IBGE.
KARPINSK, A. et al (2009) Gestão diferenciada de resíduos da construção civil: uma abordagem ambiental. Porto Alegre: EDIPUCRS.
MARTÍNEZ-MOLINA, W. et al (2015) Recycled concrete: a review. Journal of the Latin-American Association of Quality Control, Pathology and Recovery of Construction, v. 5, n. 3, p. 224-237.
MODLER, L.; POZZOBON, C. (2008) Avaliação da viabilidade técnica de concreto elaborado com agregado graúdo reciclado. Teoria e Prática na Engenharia Civil, v. 11, p. 43-53.
PACHECO-TORGAL, F.; JALALI, S. (2011) Nanotechnology: advantages and drawbacks in the field of construction and building materials. Construction and Building Materials, v. 25, n. 2, p. 582-590.
PORTO, M.; SILVA, S. (2008) Reaproveitamento dos entulhos de concreto na construção de casas populares. Rio de Janeiro: ENEGEP.
SERPA, N. (2017) Lecture notes on advanced constructive technologies. Notas de Aula do Curso de Engenharia Civil - Pontes e Estruturas Especiais, Centro Universitário ICESP de Brasília.
SHARMA, J.; SINGLA, S. (2014) Study of recycled concrete aggregates. International Journal of Engineering Trends and Technology, v. 13, n. 3, p. 123-125.