Study of times and movements in the service sector: an analysis in a beauty salon
Main Article Content
Abstract
This work presents a review of motion and time made in the most performed service in a small beauty salon in Mossoró - RN - Brazil. Thus, this research aims to use the knowledge derived from the engineering of methods, precisely, the studies movements and times and to associate such studies, which were developed mainly within the manufacturing process, to bring to a service delivery environment. To have specific objectives, to prepare a flowchart of the operation of the manicure service, to find the standard time of this service through the chronoanalysis of the stages of the task and to carry out the study of the methods developed during the execution of the service in question. In this sense, it can conclude that employing the chrono-analysis tool, the default time for the chosen operation is approximately 36 minutes. This finding means that this is the period required to provide a unit of the manicure service, considering the skills, efforts, conditions, and consistencies of the operator, the physical environment, the materials, and equipment analyzed. This work presents a study of motion and time in the most performed service in a small beauty salon in the city of Mossoró/RN, in Brazil.
Downloads
Metrics
Article Details
1. Proposal of Policy for Free Access Periodics
Authors whom publish in this magazine should agree to the following terms:
a. Authors should keep the copyrights and grant to the magazine the right of the first publication, with the work simultaneously permitted under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 that allows the sharing of the work with recognition of the authorship of the work and initial publication in this magazine.
b. Authors should have authorization for assuming additional contracts separately, for non-exclusive distribution of the version of the work published in this magazine (e.g.: to publish in an institutional repository or as book chapter), with recognition of authorship and initial publication in this magazine.
c. Authors should have permission and should be stimulated to publish and to distribute its work online (e.g.: in institutional repositories or its personal page) to any point before or during the publishing process, since this can generate productive alterations, as well as increasing the impact and the citation of the published work (See The Effect of Free Access).
Proposal of Policy for Periodic that offer Postponed Free Access
Authors whom publish in this magazine should agree to the following terms:
a. Authors should keep the copyrights and grant to the magazine the right of the first publication, with the work simultaneously permitted under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 [SPECIFY TIME HERE] after the publication, allowing the sharing of the work with recognition of the authorship of the work and initial publication in this magazine.
b. Authors should have authorization for assuming additional contracts separately, for non-exclusive distribution of the version of the work published in this magazine (e.g.: to publish in institutional repository or as book chapter), with recognition of authorship and initial publication in this magazine.
c. Authors should have permission and should be stimulated to publish and to distribute its work online (e.g.: in institutional repositories or its personal page) to any point before or during the publishing process, since this can generate productive alterations, as well as increasing the impact and the citation of the published work (See The Effect of Free Access).
d. They allow some kind of open dissemination. Authors can disseminate their articles in open access, but with specific conditions imposed by the editor that are related to:
Version of the article that can be deposited in the repository:
Pre-print: before being reviewed by pairs.
Post-print: once reviewed by pairs, which can be:
The version of the author that has been accepted for publication.
The editor's version, that is, the article published in the magazine.
At which point the article can be made accessible in an open manner: before it is published in the magazine, immediately afterwards or if a period of seizure is required, which can range from six months to several years.
Where to leave open: on the author's personal web page, only departmental websites, the repository of the institution, the file of the research funding agency, among others.
References
ANIS, G. C. (2010) A Importância dos estudos de tempos e métodos para controle da produtividade e qualidade. September. Acessed 20 March 2017. https://www.polimeroseprocessos.com/imagens/tempometodos.pdf.
BARNES, R. M. (1977) Estudo de movimentos e de tempos: projeto e medida do trabalho. 6 ed. São Paulo: Blucher.
BORBA, M. et.al. (2008) Comparação dos métodos de análise de tempos pré-determinados MTM-A1 e MTMUAS: um estudo de caso junto a uma linha de montagem de telefones. In: XV SIMPÓSIO DE ENGENHARIA DE PRODUÇÃO – SIMPEP. Proceedings... Bauru/SP, November, 10-12.
CONTADOR, J. C. (2010) Gestão de operações: A engenharia de produção a serviço da modernização da empresa. 3 ed. São Paulo: Blucher.
CORRÊA, H. L.; GIANESI, I. G. N. (2012) Administração estratégica de serviços: operações para satisfação dos clientes. 1 ed. São Paulo: Atlas.
FELIPPE, A. D., et al. M. (2012) Análise descritiva do estudo de tempos e métodos: uma aplicação no setor de embaladeira têxtil. In: IX SIMPÓSIO DE EXCELÊNCIA EM GESTÃO – SEGET. Proceedings... Rio de Janeiro/RJ, October, 24-26.
FIGUEIREDO, F. J. S.; OLIVEIRA, T. R. C.; SANTOS, M. B. P. A. (2011) Estudo de tempos em uma indústria e comércio de calçados e injetados Ltda. In: XXXI ENCONTRO NACIONAL DE ENGENHARIA DE PRODUÇÃO – ENEGEP. Proceedings...Belo Horizonte/MG, October, 4-7.
FITZSIMMONS, J. A.; FITZSIMMONS, M. J. (2010) Administração de Serviços: Operações, Estratégia e Tecnologia da Informação. 1 ed. Porto Alegre: Bookman.
JURAN, J. M.; GRYNA, F. M. (1993) Controle da Qualidade. 4 ed. São Paulo: Makron, McGrawHill.
LOVELOCK, C.; WIRTZ, J.; HEMZO, M. A. (2011) Marketing de serviços: Pessoas, Tecnologia, Estratégia. 7 ed. São Paulo: Pearson.
MARTINS, P. G.; LAUGENI, F. P. (2005) Administração da produção. 2 ed. São Paulo: Saraiva.
MIAO, et al. (2012) MobiHealthcare System: Body Sensor Network Based M-Health System for Healthcare Application. E-Health Telecommunication Systems and Networks, v. 1, n.1, 12–18. http://dx.doi.org/10.4236/etsn.2012.11003
NORONHA, A. P. L.; OLIVEIRA, S. B.; LEITE, M. S. A. (2006) Aplicação do custeio baseado em atividade (ABC) aos serviços prestados por um salão de beleza. In: XXVI Encontro Nacional de Engenharia de Produção – ENEGEP. Proceedings... Fortaleza/CE, October, 9-11.
PEINADO, J.; GRAEML, R. A. (2007) Administração da produção. 1 ed. Curitiba: Unicenp.
POLLACK, B. L. (2008) The nature of the service quality and satisfaction relationship: Empirical evidence for the existence of satisfiers and dissatisfiers. Managing Service Quality, v. 18, n. 6, 537-558. http://dx.doi.org/10.1108/09604520810920059
RIBEIRO, J. L. D.; THIESEN, J. P. K.; TINOCO, M. A. C. (2013) Determinantes da satisfação e atributos da qualidade em serviços de salão de beleza. Produção, v. 23, n. 3, 609-624. http://dx.doi.org/10.1590/S0103-65132012005000080
SANTOS, R. L. S.; BARRETO, E. G. L.; MENEZES, V. L. (2011) Análise e proposta de melhorias de atividades em uma empresa de serviços a partir da utilização dos recursos esquemáticos. In: XXXI Encontro Nacional de Engenharia de Produção – ENEGEP. Proceedings... Belo Horizonte/MG, October, 4-7.
SEBRAE - Service to Support Micro and Small Enterprises (2016). Práticas de empreendedorismo para salões de beleza no Brasil. Available: http://www.bibliotecas.sebrae.com.br/chronus/ARQUIVOS_CHRONUS/bds/bds.nsf/4602d82927d00015cd3a739fc78b01ae/$File/7384.pdf. Access: 13/03/2017.
SLACK, N.; CHAMBERS, S.; JOHNSTON, R. (2009) Administração da produção. 3 ed. São Paulo: Atlas.
SOUTO, M. S. M. L. (2004) Engenharia de Métodos. Curso de especialização em Engenharia de Produção. Universidade Federal da Paraíba, PPGEP.
TALLURI, S.; MYUNG K. K.; TOBIAS S. (2013) The Relationship between operating efficiency and service quality: are they compatible?” International Journal of Production Research, v. 51, n. 8, 2548–67. https://doi.org/10.1080/00207543.2012.737946
TARDIN, M. G. et al. (2013) Aplicação de conceitos de engenharia de métodos em uma panificadora: um estudo de caso na panificadora Monza. In: XXXI Encontro Nacional de Engenharia de Produção – ENEGEP. Proceedings... Salvador/BA, October, 8-11.
TOLEDO JÚNIOR, I.F.B. (2004) Tempos & Métodos. 8 ed. Mogi das Cruzes SP: Escola Editora.
VIEIRA, R. R., et al. (2016). Estudo de tempos e métodos no processo produtivo de uma panificadora localizada em Mossoró/RN. Gestão e Sociedade, v. 9, n. 23, 977-999. https://doi.org/10.21171/ges.v9i23.2029
WEINSWIG, D. (2016) Fung Global Retail & Technology. The Beauty Market in Brazil.