Introductory background for Life Cycle Assessment (LCA) of pure silk fabric
Article Sidebar
Main Article Content
Abstract
The main goal of this study is to provide an introductory background to development of the Life Cycle Assessment studies of pure silk fabric. There are not studies available on the life cycle of pure silk fabric. In this sense, was developed a scenario model for LCA application, following the methodology established by the Standard BNR ISO 14040:2009, which establishes principles and framework for an LCA study. It was considered one of the first steps in ISO, being the definition of the purpose and scope. The limits considered for the system had as a starting point the wiring step within the company, and as a final limit the stage of the finishing of the fabric, where you get the finished product. The information used in this study was collected directly from the company entitled 'Fio de Seda', a Brazilian industry. In order to construct the scenario proposed, was used the software Umberto® 5.6 v. Acad and through it, it was possible to generate the scenario model for the production of the silk fabric. Based on this scenario, the accomplishment of the later stages is possible, as outlined in ISO 14040, thus obtaining the inventory of the LCA for the pure silk fabric, as well as its life cycle inventory assessment.
Downloads
Article Details
1. Proposal of Policy for Free Access Periodics
Authors whom publish in this magazine should agree to the following terms:
a. Authors should keep the copyrights and grant to the magazine the right of the first publication, with the work simultaneously permitted under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 that allows the sharing of the work with recognition of the authorship of the work and initial publication in this magazine.
b. Authors should have authorization for assuming additional contracts separately, for non-exclusive distribution of the version of the work published in this magazine (e.g.: to publish in an institutional repository or as book chapter), with recognition of authorship and initial publication in this magazine.
c. Authors should have permission and should be stimulated to publish and to distribute its work online (e.g.: in institutional repositories or its personal page) to any point before or during the publishing process, since this can generate productive alterations, as well as increasing the impact and the citation of the published work (See The Effect of Free Access).
Proposal of Policy for Periodic that offer Postponed Free Access
Authors whom publish in this magazine should agree to the following terms:
a. Authors should keep the copyrights and grant to the magazine the right of the first publication, with the work simultaneously permitted under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 [SPECIFY TIME HERE] after the publication, allowing the sharing of the work with recognition of the authorship of the work and initial publication in this magazine.
b. Authors should have authorization for assuming additional contracts separately, for non-exclusive distribution of the version of the work published in this magazine (e.g.: to publish in institutional repository or as book chapter), with recognition of authorship and initial publication in this magazine.
c. Authors should have permission and should be stimulated to publish and to distribute its work online (e.g.: in institutional repositories or its personal page) to any point before or during the publishing process, since this can generate productive alterations, as well as increasing the impact and the citation of the published work (See The Effect of Free Access).
d. They allow some kind of open dissemination. Authors can disseminate their articles in open access, but with specific conditions imposed by the editor that are related to:
Version of the article that can be deposited in the repository:
Pre-print: before being reviewed by pairs.
Post-print: once reviewed by pairs, which can be:
The version of the author that has been accepted for publication.
The editor's version, that is, the article published in the magazine.
At which point the article can be made accessible in an open manner: before it is published in the magazine, immediately afterwards or if a period of seizure is required, which can range from six months to several years.
Where to leave open: on the author's personal web page, only departmental websites, the repository of the institution, the file of the research funding agency, among others.
References
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS (ABNT) (2009a) NBR ISO 14040: Gestão Ambiental - Avaliação do ciclo de vida - Princípios e estrutura. Brasil.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS (ABNT) (2009b) NBR ISO 14044: Gestão Ambiental - Avaliação do ciclo de vida – Requisitos e Orientações. Brasil.
ATHENA SUSTAINABLE MATERIALS INSTITUTE. (2009) Available: http://www.athenasmi.org/what-we-do/lca-data-software/. Access: 03th November.
BENEDETTO, L. D.; KLEMES, J. (2009) The Environmental Performance Strategy Map: an integrated LCA approach to support the strategic decision-making process. Journal of Cleaner Production, v. 17, n. 10, p. 900-906.
BRANCALHÃO, R. M. C. (2005) Bicho-da-seda. Available: http://www.seab.pr.gov.br/arquivos/File/complexo_da_seda/b_mori.pdf. Access: 15th April, 2011.
BUSCH, A. P. B. (2010) Sericicultura. Available: http://www.seab.pr.gov.br/arquivos/File/deral/Prognosticos/seda_2010_11.pdf. Access: 15th April, 2011.
BUSCH, A. P. B.; FREITAS, M. C. D. O.; MAZZAROTTO, M. (2010) Relatório Takii: perfil da sericicultura no Estado do Paraná. Available: http://www.seab.pr.gov.br/arquivos/File/deral/relatorio_takii_2009_10.pdf. Access: 17th April, 2011.
CHEHEBE, J. R. B. (1997) Análise do ciclo de vida de produtos: ferramenta gerencial da ISO 14000. Rio de Janeiro: Qualitymark.
COSTA, M. S. V. (2007) O enfoque de ciclo de vida como estratégia para a gestão sustentável: um estudo de caso sobre pneus. Dissertação (Mestrado em Ciências em Engenharia de Produção). Rio de Janeiro: UFRJ.
CHATAIGNIER, G. (2006) Fio a fio: tecidos, moda e linguagem. São Paulo: Estação da Letras.
FERNANDEZ, M. A.; CIFEERI, R. R.; PATUSSI, E. V.; PEREIRA, M. F.; FELIPES, J.; BRAVO, J. P.; ZANATA, D. B.; GOUVEIA, F. S.; BALANI, V. A. (2005) A utilização da biotecnologia na sericicultura brasileira. Biotecnologia Ciência & Desenvolvimento, n. 35, p. 52-57. Available: http://www.biotecnologia.com.br/revista/bio35/bio_35.pdf. Access: 04th April, 2013.
GUINÉE, J. B.; GORÉE, M.; HUPPES, R, H. G.; KLEIJN. R.; KONING, A.; SLEESWIJK, L. O. A. W.; SUH, S.; HAES, H. A. U. (2001) Handbookon Life Cycle Assessment Operational Guide to the ISO Standards. Publisher: Kluwer Academic Publishers, Dordrecht.
MENEGUIM, A. M.; LOVATO, L.; SILVA, R. Z.; YAMAOKA, R. S.; NAGASHIMA, G. T.; PASINI, A. (2007) Influência de cultivares de Amoreira Morus spp. Sobre a produção e qualidade de casulos de bicho-da-seda, Bombyx mori L. (Lepidoptera: Bombycidae). Neotropical Entomology, v. 3, n. 5, p. 670-674.
OLIVEIRA, M. H. (2011) Seda, um tecido nobre. Available: http://www.bndes.gov.br/SiteBNDES/export/sites/default/bndes_pt/Galerias/Arquivos/conhecimento/setorial/is11seda.pdf. Access:18th April, 2011.
ORIGEM DOS TECIDOS. (2011) Tipos e origens dos tecidos. Available: http://tecidos.pbworks.com/w/page/20358299/Origem-dos-tecidos. Access: 20th April, 2011.
PÁDUA, O. S. (2005) A origem da sericicultura. Available: http://www.seab.pr.gov.br/arquivos/File/complexo_da_seda/folder_origem.pdf. Access: 26th April, 2011.
PEREIRA, C. L. F. (2008) Avaliação da Sustentabilidade Ampliada de Produtos Agroindustriais: estudo de caso suco de laranja e etanol. Tese (Doutorado em Engenharia de Alimentos). Campinas: Universidade Estadual de Campinas.
PEZZOLO, B. D. (2008). Tecidos: história, tramas, tipos e uso. São Paulo: SENAC SP.
PIEKARSKI, C. M.; LUZ, L. M.; ZOCCHE, L.; FRANCISCO, A. C. (2013) Life Cycle Assessment as Entrepreneurial Tool for Business Management and Green Innovations. Journal of Technology Management & Innovation, v. 8, n. 1, p. 44-53.
PORTO, A. J.; OKAMOTO, F.; CUNHA, E. A.; OTSUK, I. P. (2004) Caracterização de oito raças do bicho-da-seda (Bombyx mori L.). Ciência Rural, v. 34, n. 1, p. 259-264.
PRADO, M. R. (2007). Análise do inventário do ciclo de vida de embalagens de vidro, alumínio e pet utilizadas em uma indústria de refrigerantes no Brasil. Tese (Doutorado em Tecnologia de Alimentos). Curitiba: Universidade Federal do Paraná.
ROBLES JUNIOR, A.; BONELLI, V. V. (2006) Gestão da qualidade e do meio ambiente: enfoque econômico, financeiro e patrimonial. São Paulo: Editora Atlas.
ROY, P.; NEI, D.; ORIKASA, T.; XU, Q.; OKADOME, H.; NAKAMURA, N.; SHIINA, T. (2009). A review of life cycle assessment (LCA) on some food products. Journal of Food Engineering, v. 90, n. 1, p. 1-10.
SANTOS, L. M. M. (2002) Avaliação ambiental de processos industriais. Ouro Preto: ETFOP.
SEAB – Secretaria de Estado da Agricultura e do Abastecimento. (2011) O Processo de Industrialização do Fio da Seda. Available: http://www.seab.pr.gov.br/arquivos/File/complexo_da_seda/industrializacao_fio_seda.pdf. Access: 25th April, 2011.
SIRINGO, J. (2011) A Magia que veio do Oriente. Revista Magazine Lupo, v. 6, n. 17, p. 14-17.
UNEP - UNITED NATIONS ENVIRONMENT PROGRAMME (2003) Evaluation of environmental impacts in life cycle assessment. Available: http://www.unep.fr/scp/publications/details.asp?id=3234. Access: 06th November, 2009.
VALT, R. B. G. (2004) Análise do ciclo de vida de embalagens de pet, de alumínio e de vidro para refrigerantes no Brasil variando a taxa de reciclagem dos materiais. Dissertação (Mestrado em Engenharia). Curitiba: UFPR.
ZANATTA, D. B.; BRAVO, J. P.; BARBOSA, J. F.; MUNHOZ, R. E. F.; FERNANDEZ, A. M. (2009) Avaliação de características economicamente importantes de dezesseis linhagens parentais do bicho-da seda Bombyx mori L (Lepidoptera: Bombycidae). Neotropical Entomology, v. 38, n. 3, p. 327-331.