Health and safety (hs) risks normalization in the construction industry: the SMEs perspective
Main Article Content
صندلی اداریAbstract
Downloads
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
1. Proposal of Policy for Free Access Periodics
Authors whom publish in this magazine should agree to the following terms:
a. Authors should keep the copyrights and grant to the magazine the right of the first publication, with the work simultaneously permitted under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 that allows the sharing of the work with recognition of the authorship of the work and initial publication in this magazine.
b. Authors should have authorization for assuming additional contracts separately, for non-exclusive distribution of the version of the work published in this magazine (e.g.: to publish in an institutional repository or as book chapter), with recognition of authorship and initial publication in this magazine.
c. Authors should have permission and should be stimulated to publish and to distribute its work online (e.g.: in institutional repositories or its personal page) to any point before or during the publishing process, since this can generate productive alterations, as well as increasing the impact and the citation of the published work (See The Effect of Free Access).
Proposal of Policy for Periodic that offer Postponed Free Access
Authors whom publish in this magazine should agree to the following terms:
a. Authors should keep the copyrights and grant to the magazine the right of the first publication, with the work simultaneously permitted under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 [SPECIFY TIME HERE] after the publication, allowing the sharing of the work with recognition of the authorship of the work and initial publication in this magazine.
b. Authors should have authorization for assuming additional contracts separately, for non-exclusive distribution of the version of the work published in this magazine (e.g.: to publish in institutional repository or as book chapter), with recognition of authorship and initial publication in this magazine.
c. Authors should have permission and should be stimulated to publish and to distribute its work online (e.g.: in institutional repositories or its personal page) to any point before or during the publishing process, since this can generate productive alterations, as well as increasing the impact and the citation of the published work (See The Effect of Free Access).
d. They allow some kind of open dissemination. Authors can disseminate their articles in open access, but with specific conditions imposed by the editor that are related to:
Version of the article that can be deposited in the repository:
Pre-print: before being reviewed by pairs.
Post-print: once reviewed by pairs, which can be:
The version of the author that has been accepted for publication.
The editor's version, that is, the article published in the magazine.
At which point the article can be made accessible in an open manner: before it is published in the magazine, immediately afterwards or if a period of seizure is required, which can range from six months to several years.
Where to leave open: on the author's personal web page, only departmental websites, the repository of the institution, the file of the research funding agency, among others.
References
Abas, N. H., Jalani, A. F. A. J., & Affandi, H. M. (2020). Construction Stakeholders’ Perceptions of Occupational Safety and Health Risks in Malaysia. Journal of Sustainable Construction Engineering and Technology, 11(1), 300-311. DOI: https://doi.org/10.30880/ijscet.2020.11.01.029
Abdi, H., & Williams, L. J. (2010). Principal component analysis. Wiley Interdisciplinary Reviews:Computational Statistics, 2(4), 433-459.
Aghimien, D., Aigbavboa, C., Thwala, G., & Thwala, W. (2019). Critical Drivers for Health and Safety Management among SMEs in the Eswatini Construction Industry. 1st International Conference on Sustainable Infrastructural Development. IOP Conference Series: Materials Science and Engineering, (640), 1-9. doi:10.1088/1757-899X/640/1/012005
Aghimien, D. O., Oke, A. E., Aigbavboa, C. O., & Ontlametse, K. (2018). Factors Contributing to Disabling Injuries and Fatalities in the South African Construction Industry. Joint CIB W099 and TG59 International Safety, Health, and People in Construction Conference, held in Salvador, in Brazil in 1st -3rd of August, 337-345
Arewa, A. O., & Farrell, P. (2012). A review of compliance with health and safety regulations and economic performance in small and medium construction enterprises In: Smith, S. D (Ed). Procs 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK, Association of Researchers in Construction Management, 423-432
Arocena, P., & Núñez, I. (2010). An empirical analysis of the effectiveness of occupational health and safety management systems in SMEs. International Small Business Journal, 28(4), 398-419.
Arunkumar, K., & Gunasekaran, J. (2018). Causes and effects of accidents on construction site. International Journal of Engineering Science and Computing, 8(6), 18102-18110
Atkinson, R., 7 Flint, J. (2001). Accessing hidden and hard-to-reach populations: snowball research strategies. Social Research Update, Issue 33, published by Department of Sociology University of Surrey, Guildford, United Kingdom.
Bagaya, O., & Song, J. (2016). Empirical study of factors influencing schedule delays of public construction projects in Burkina Faso. Journal of Management Engineering. 32(5), 05016014. https://doi.org/10.1061/(ASCE).ME.1943-5479.0000443.
Barbeau, E., Roelofs, C., Youngstrom, R., Sorensen, G., Stoddard, A., & Lamontagne, A. D. (2004). Assessment of occupational safety and health programs in small businesses. American Journal of Industrial medicine, 45(4), 371-379. Doi:10.1002/ajim.10336
Belayutham, S., & Ibrahim, C. K. I. Z (2019). Barriers and Strategies for Better Safety Practices: The Case of Construction SMEs in Malaysia. Construction Economics and Building, 19(1), Article ID 6331. https://doi. org/10.5130/AJCEB.v19i1.6331
Bell, J., & Healey, N. (2006). The Causes of Major Hazard Incidents and How to Improve Risk Control and Health and Safety Management: A Review of the Existing Literature. Health and safety Laboratory, Harpur Hill, Buxton Derbyshire, SK17 9JN. Availavle at: https://www.hse.gov.uk/Research/hsl_pdf/2006/hsl06117.pdf
Berr (2008). Improving outcomes from health and safety. A report to Government by the Better Regulation Executive. Department for Business Enterprises and Regulatory Reform, London, August), 6-29.
Champoux, D., & Brun J. (2003). Occupational health and safety management in small size enterprises: an overview of the situation and avenues for intervention and research. Safety Science, 41(4), 301–318.
Chiocha, C., Smallwood, J., & Emuze, F. (2011). Health and safety in the Malawian construction industry. Journal of Acta Structilia, 18(1), 68-80
CIDB (2018). Construction Industry Review & Prospect 2016/2017: Chapter 2 – Construction Projects, Contractors and Personnel. Available at: http://www.cidb.gov.my/images/content/pdf/bisnes/ const-review-2016-2017/CIDB----Construction-Industries-Review---Chapter-2-Jan-15-2018.pdf (Accessed 10 March 2019).
Cresswell, J. W., & Plano, C. V. L. (2011). Designing and Conducting mixed method research (2nd ed.).. Thousand Oaks, CA: Sage
EU-Osha, (2014). The Business Case for Safety and Health at Work: Cost-benefit Analyses of Interventions in Small and Medium-sized Enterprises. European Agency for Safety and Health at Work, Luxembourg.
Eashw (2003). FACTS 37. Improving occupational safety and health in SMEs: example of effective assistance. European Agency for Safety and Health at Work. Summary of an Agency report, Gran-Bibao), 1-2.
European Commission. (2015). User guide to the SME definition. Luxembourg: Publications Office of the European Union
Eze, E. C., Seghosime, R., Eyong, O. P., & Loya, O. S. (2017). Assessment of materials waste in the construction industry: A view of Construction Operatives, Tradesmen and Artisans in Nigeria. The International Journal of Engineering and Science, 6(4), 32-47. DOI: 10.9790/1813-0604013247
Eze,C. E., Awodele, I. A., Adegboyega, A. A., Onyeagam, O. P., & Guto, J. A. (2020). Assessment of the Triggers of Inefficient Materials Management Practices by Construction SMEs in Nigeria. International Journal of Real Estate Studies, 14(1), 38-56
Field A. (2000). Discovering Statistics using SPSS for Windows. London: Sage publications.
Floyde, A., Lawson, G., Shalloe, S., Eastgate, R., & D’cruz, M. (2013). The design and implementation of knowledge management systems and e-learning for improved occupational health and safety in small to medium sized enterprises. Safety Science(60), 69-76.
Gao, R., Chan, A. P. C., Utama, W. P., & Zahoor, H. (2017). Workers’ Perceptions of Safety Climate in International Construction Projects: Effects of Nationality, Religious Belief, and Employment Mode. Journal of Construction Engineering and Management, 143(4), 04016117, https://doi.org/10.1061/(ASCE).CO.1943-7862.0001226.
Ghasem, A., & Zahediasl, S. (2012). Normality test for statistical analysis: A guide for non-statisticians. International Journal Endocrinol Metab., 10(2), 486–489.
Gulani, M. G., & Usman, A. (2012). Financing small and medium scale enterprises (SMEs).: A challenge for entrepreneurial development in Gombe State. Asian Journal of Business and Management Sciences, 2(9), 17-23.
Gunduz, M., & Laitinen, H. (2018). Construction safety risk assessment with introduced control levels. Journal of Civil Engineering and Management, 24(1), 11-18. https://doi.org/10.3846/jcem.2018.284
Hair, J. F., Black, W. C., Babin, B. J., & Anderson, R. E. (2010). Multivariate data analysis. Upper Saddle River, NJ: Pearson.
Hasle, P., Bager, B., & Granerud, L. (2010). Small enterprises – Accountants as occupational health and safety intermediaries. Safety Science, 48(3), 404-409.
Hasle, P., Kvorning, L. V., Rasmussen, C. D. N., Smith, L. H., & Flyvholm, M. A. (2012). A model for design of tailored working environment intervention programmes for small enterprises. Safety Health Work(3), 181–191. https://doi.org/10.5491/SHAW.2012.3.3.181
Hasle, P., & Limborg, H. J. (2006). A review of the literature on preventive occupational health and safety activities in small enterprises. Industrial Health, 44(1), 6-12.
Heckathorn, D. D. (2011). Comments: snowballing versus respondent-driven sampling. Sociological Methodology, 41(1), 355-366.
IBM (2011).. IBM SPSS Statistics for Windows, Version 20.0. Armonk, NY: IBM Corp.
Jaroenroy, T., & Chompunth, C. (2019). An Alternative Integrated Occupational Health, Safety and Environmental Management System for Small And Medium-Sized Enterprises (SMEs). In Thailand. International Journal of Geomate, 17(62), 84 -91. Doi: Https://Doi.Org/10.21660/2019.62.8168
Jennings, P. (2016). Have you become victim to the normalization of risk? https://blog.hsb.com/2016/08/04/normalization-of-deviance/
Jørgensen, K., Duijm, N. J., & Troen, H. (2011). Demonstration of risk profiling for promoting safety in SMEs. International Journal of Workplace Health Management, 4(2), 179-193.
Kadiri, Z. O., Nden, T., Avre, G. K., Oladipo T. O., Edom, A., Samuel P. O., & Ananso, G. N. (2014). Causes and Effects of Accidents on Construction Sites (A Case Study of Some Selected Construction Firms in Abuja F.C.T Nigeria. Journal of Mechanical and Civil Engineering (IOSR-JMCE)., 11(4), 66-72
Kheni, N., Gibb, A., & Dainty, A. (2010). Health and Safety Management within Small- and Medium-Sized Enterprises (SMEs). in Developing Countries: Study of Contextual Influences. Journal of Construction Engineering and Management, 136(10), 1104-1115.
Kolo , D. N. (2015). Safety Issues Involving Workers on Building Construction Sites in Nigeria: An Abuja Study. MSc Thesis, Eastern Mediterranean University, Gazimağusa, North Cyprus
Laryea, S., & Mensah, S. (2010). The evolution of indigenous contractors in Ghana. In: Laryea, S., Leiringer, R., & Hughes, W. (Eds). Procs West Africa Built Environment Research (WABER). Conference, 27-28 July, Accra, Ghana, 579-588.
Legg, S. J., Olsen, K. B., Laird, I. S., & Hasle, P. (2015). Managing safety in small and medium enterprises. Safety Science, (71,Part C), 189-196.
Lin, J., & Mills, A. (2001). Measuring the occupational health and safety performance of construction companies in Australia. Facilities, 19(3/4), 131-139.
Lingard, H. (2013). Occupational health and safety in the construction industry. Construction Management and Economics, 31(6), 505-514
Lingard, H., & Blismas, N. (2013). Client OHS leadership: An evaluation of client leadership in occupational health and safety in the Australian construction industry. RMIT University, Melbourne, 2013.
Loosemore, M., & Andonakis, N. (2007). Barriers to implementing OHS reforms – The experiences of small subcontractors in the Australian Construction Industry. International Journal of Project Management(25), 579–588.
Lu, L. (2018). Promoting SME finance in the context of the fintech revolution: A case study of the UK's practice and regulation. Banking and Finance Law Review, 33(3), 317-343.
Manu, P., Mahamadu, A-M., Phung, V. M., Nguyen, T. T., Ath, C., Heng, A. Y. T., & Kit, S. C. (2018). Health and safety management practices of contractors in South East Asia: A multi country study of Cambodia, Vietnam and Malaysia. Safety Science, (107), 188–201.
Masi, D., Cagno, E., & Micheli, G. J. L. (2014). Developing, Implementing and Evaluating OSH Interventions in SMEs: A Pilot, Exploratory Study. International Journal of Occupational Safety and Ergonomics, 20(3), 385-405, DOI:10.1080/10803548.2014.11077059
Mohamed, S., Ali, T. H., & Tam, W. Y. V. (2009). National culture and safe work behaviour of construction workers in Pakistan. Safety Science., 47(1), 29–35.
Naderifar, M., Goli, H., & Ghaljaie, F. (2017). Snowball Sampling: A Purposeful Method of Sampling in Qualitative Research. Strides Dev Med Education, 14(3), 1-6. Doi: 10.5812/sdme.67670
National Bureau Of Statistics. (2019). Micro, small and medium enterprises (MSEM). national survey 2017 report. Abuja: NBS.
Okoye, P. U. (2018). Occupational health and safety risk levels of building construction trades in Nigeria. Construction Economics and Building, 18(2), 92-109. http:// dx.doi.org/10.5130/AJCEB. v18i2.5882
Okoye, P. U., & Okolie, K. C. (2014). Exploratory study of the cost of health and safety performance of building contractors in South-East Nigeria. British Journal of Environmental Sciences, 2(1), 21-33.
Orji, E., Enebe, E. C., & Onoh, F. E. (2016). Accidents in Building Construction Sites in Nigeria; a Case of Enugu State. International Journal of Innovative Research, 5(4), 244-248
Othman, I., Shafiq, N., & Nuruddin, M. F. (2017). Quality planning in Construction Project. IOP Conf. Series: Materials Science and Engineering 291), 1-5
Ozmec, M. N., Karlsen, I. L., Kines, P., Andersen, L. P. S., & Nielsen, K. J. (2014). Negotiating safety practice in small construction companies, Safety Science(71,Part C), 275-281.
Pallant, J. (2005). SPSS Survival Manual: A Step By Step Guide to Data Analysis Using SPSS for Windows (Version 12)., (2nd ed.).. Allen and Unwin, Crows Nest NSW 2065.
Pallant, J. (2007). SPSS survival manual: A step-by-step guide to data analysis using SPSS (version 15)., (3rd ed.).. Milton Keynes: Open University Press.
Randy, B (2017). Normalization of deviance and risk management. http://roughnotes.com/normalization-deviance-risk-management/
Rizwan, U. F. (2012). An Exploratory Study Probing Into the Factors Causing Safety Non-Performance in the Pakistani Construction Industry,” in 45th IEP Convention 2012, 1–12.
Shabangu, N. I. (2017). Health and Safety Culture on Small Residential Construction Sites: The Case of Waterfall Country Estate, Midrand. A Research Report proposal submitted to the Faculty of Engineering and the Built Environment, in partial fulfilment of the requirements for the degree of MSc (Building). Project Management in Construction, University of the Witwatersrand, Johannesburg, South Africa
Shafii, H. B., Bin-Shahna, E. A., Meryam, S., & Md Yassin, A. (2019). Study On Promote Occupational Safety And Health Practices In Construction Projects. Journal Of Technology Management And Business, 6(3), 029–039
SMEDAN/NBS MSME Survey. (2013). SMEDAN and National Bureau of Statistics collaborative survey: Selected findings. Abuja: NBS. Retrieved from https://www.smedan.gov.ng/images/PDF/2013-MSME-Survey-Summary-Report.pdf.
Spector, P. E. (1992). Summated rating scale construction: An introduction. Newbury Park, CA: Sage Publications.
Stern, L. (2010). A visual approach to SPSS for Windows: a guide to SPSS 17.0. 2nd ed. Boston: Allyn and Bacon
Stiles, S., Golightly, D., & Wilson, J. R., (2012). Behavioural safety amongst construction industry supply chain contractors, in: M. Anderson (ed.)., Contemporary Ergonomics and Human Factors, Taylor & Francis, 303-310.
Sunindijo, R. Y. (2015). Improving safety among small organisations in the construction industry: key barriers and improvement strategies. The 5th International Conference of Euro Asia Civil Engineering Forum (EACEF-5).. Procedia Engineering(125), 109 – 116
Surienty, L. (2012).. Management practices and OSH implementation in SMEs in Malaysia. School of Management, USM Minden, Pulau Pinang.
Szóstak, M. (2019). Analysis of occupational accidents in the construction industry with regards to selected time parameters. Open Engineering(9), 312–320.
Tabachnick, B. G., & Fidell, L. S. (2007). Using multivariate statistics (5th ed.).. Boston, MA: Pearson.
Tan, W. C. K. (2011). Practical research methods. Pearson Custom, Singapore.
Thwala, W. D., & Mvubu, M. R. (2009). Problems Facing Small and Medium Size Contractors in Swaziland. Journal Service Science and Management(2), 353-361
Unnikrishnan, S., Iqbal, R., Singh, A., & Nimkar, I. M. (2015). Safety Management Practices in Small and Medium Enterprises in India. Journal Safety and Health at Work, 6(1), 46 – 55
Usman, N. D., Inuwa, I. I., Kolawole, R. O., Kwari, J. M., & Didel, J. M. (2014). Evaluating the impact of housing delivery system on project performance within the building industry in Nigeria. Journal of Environmental Sciences and Resource Management, 6(1), 145-154.
Wadick, P. (2010). Safety culture among subcontractors in the domestic housing construction industry. Structural Survey, 28(2), 108-120.
Whysall, Z., Haslam, C., & Haslam, R. (2006). Implementing health and safety interventions in the workplace: an exploratory study. International Journal of Indsutrial Ergonomics, 36(9), 809-818
Williams, O. S., Hamid, R. A., & Misnan, M. S. (2018). Accident Causal Factors On the Building Construction Sites: A Review. International Journal of Built Environment and Sustainability (IJBES), 5(1), 78-92
Ye, G., Jin, Z., Xia, B., & Skitmore, M. (2015). Analyzing causes for reworks in construction projects in China. Journal of Management Engineering, 31(6), 04014097. https://doi.org/10.1061/(ASCE).ME.1943-5479.0000347.
Ying, J., Wong, Y., Gray, J., & Sadiqi, Z. (2015). Barriers to Good Occupational Health & Safety (OHS). Practices by Small Construction Firms), 1-18. Available at https://www.researchgate.net/publication/281495184
Zahoor, H., Chan, A. P. C., Utama, W. P., & Gao, R. (2015). A research framework for investigating the relationship between safety climate and safety performance in the construction of multi-storey buildings in Pakistan. Procedia Engineering(118), 581 – 589
Zhao, J., Joas, R., Abel, J., Marques, T., & Suikkanen, J. (2013). Process safety challenges for SMEs in China. Journal of Loss Prevention in the Process Industries, 26(5), 880-886.
Zhao, N. (2008). The minimum sample size in factor analysis. Retrieved from https://www.encorewiki.org/plugins/servlet/mobile#content/view/25657.